6 Models
Accelerometers
AM-200 Series — 3-axis MEMS accelerometers with industry-leading noise performance. From ±2g precision tilt sensing to ±200g shock measurement. Built-in FFT engine for edge vibration analysis.
AM-200 Series — 3-axis MEMS accelerometers with industry-leading noise performance. From ±2g precision tilt sensing to ±200g shock measurement. Built-in FFT engine for edge vibration analysis.
| Parameter | Specification | Condition |
|---|---|---|
| Measurement Range | ±2g, ±4g, ±8g, ±16g, ±50g, ±100g, ±200g | Selectable |
| Axes | 3-axis (X, Y, Z) | Simultaneous sampling |
| Noise Density | 0.01 mg/√Hz (±2g mode) | X/Y axes |
| Bandwidth | DC to 5 kHz (-3 dB) | Programmable |
| Sample Rate | 1 Hz to 52 kHz | Per axis |
| Resolution | 20-bit (0.06 mg/LSB @ ±2g) | Digital output |
| Non-linearity | ±0.1% FS | Best-fit straight line |
| Cross-axis Sensitivity | ±0.5% | Typical |
| Bias Stability | 10 μg (Allan variance) | @ 25°C |
| Supply Voltage | 2.5V to 5.5V | VDD |
| Current | 450 μA (active), 5 μA (standby) | |
| Interface | SPI (up to 25 MHz), I²C (up to 1 MHz) |
On-sensor 1024-point FFT engine computes frequency spectra at the edge — no external DSP required. Streams vibration signature directly to your MCU via SPI. Detect bearing faults before they happen.
Programmable motion threshold wakes the sensor from 5 μA standby to full acquisition in < 2 ms. Capture transient events without burning battery life on continuous sampling.
512-sample per-axis FIFO buffer decouples sensor acquisition from host MCU read timing. Perfect for burst-mode logging at 52 kHz — capture the full event, then read at your leisure.
Continuous vibration monitoring of motors, pumps, gearboxes, and rotating machinery. ISO 10816-compliant vibration severity analysis at the edge.
Bridge, building, and wind turbine structural monitoring. Ultra-low noise enables detecting micro-strain events before they become macro-failures.
Dead reckoning and attitude heading reference for drones, AGVs, and autonomous vehicles. 10 μg bias stability enables GPS-denied positioning for extended periods.
6 Models
4 Models
5 Models
4 ModelsTell us your g-range, bandwidth, and noise requirements. Our team will recommend the optimal accelerometer for your vibration monitoring or inertial sensing application.